<<  back

Non toxic Antifreeze and secondary refrigerant for Process Cooling & AC systems. Based on Propylene Glycol and ASTM D1384 proven corrosion, scale and biological inhibitors.

NTP: Propylene Glycol Antifreeze has been especially formulated for use as a Non toxic secondary refrigerant Antifreeze for use in Process Cooling, Refrigeration and Air Conditioning Systems.

NTP: Propylene Glycol Antifreeze is a clear, slightly viscous liquid and mildly sweet to the taste. It is non-pungent however it does have a characteristic aroma.

Density:	1.02 - 1.15 g/cm3 depending on inhibitors
pH:	7.5 - 10.5 depending on inhibitors
Boiling Point:	>100 °C

As per BSRIA guide BG 29/2012 all pipework systems should be clean and free from biological contamination and debris prior to commissioning. To minimse corrosion, air ingress should be minimised. A pressurised system is best.

Determine the total system volume and add NTP: Propylene Glycol Antifreeze to the system according to the minimum operating temperature required (see table below).

The minimum dose of NTP: Propylene Glycol Antifreeze should not be less than 25% of the system volume and the maximum does not normally exceed 60%. We recommend the use of deionised, distilled or UltraPure™ water for this dilution. Avoid water containing high levels of calcium salts or chlorides [CI-].

When measuring the percentage concentration of NTP: Propylene Glycol Antifreeze in solution we recommend the use of a recently calibrated refractometer.

Please refer to the associated product Safety Data Sheet which is available upon request.

3 years when stored in sealed containers out of direct sunlight.

25, 205 & 1000 Litre IBC’s and bulk tankers.

NTP: Propylene Glycol Antifreeze can also be supplied as a ready-to-use solution.

Frost Protection °C	V/V of NTP: Propylene Glycol	Refractive Index
-10	25%	1.356
-15	33%	1.364
-20	39%	1.370
-25	44%	1.373
-30	48%	1.380
-35	52.5%	1.383

BDIC strive to ensure end users and distributors receive the full benefit of working with a specialist supplier that offers:

• Expert Technical advice on all aspects of fluid selection, including Environmental Impact Assessments, Thermal Performance etc
• Fluid Maintenance Programs for the proactive verification of fluid and system condition
• A vast stock inventory facilitating same day dispatch and delivery
• Bespoke formulations for specialist applications.